AIR CONDITIONER & HEATER. COMPRESSOR & LINES. CONDENSER.. 2022 Audi A6 3.0L V6 MILD HYBRID EV-GAS (MHEV) A/T Quattro Premium Plus Sedan

2.0 OR 3.0 LITER. from 03/22/2021.

2.0 OR 3.0 LITER. 3.0 liter.

2.0 OR 3.0 LITER. Pressure sensor o-ring. 7.6 x 1.8mm. A component which prevents leaks at the Air Conditioning Refrigerant Pressure Sensor. A component which seals the A/C Service Valve Core to it's mounting point. A seal that prevents oil from leaking out, or contaminants from enteRing the Air Conditioning Refrigerant Pressure Switch. A seal that prevents oil from leaking out, or contaminants from enteRing the Air Conditioning Refrigerant Temperature Sensor. A/C Condenser Seal. A/C Line O-Ring. A/C Refrigerant Line O-Ring. Part cannot be reused/reinstalled. Part cannot be rused/reinstalled. Part Serviced with AC Line. Included with: AC Line, AC tube, Condenser, Condenser to rear hose AC hose, Discharge hose, Front AC Line, Hose and tube assembly, Liquid Line, Pressure hose, Pressure Line, Rear AC Line, Valve AC Line Part cannot be reused/reinstalled.

2.0 OR 3.0 LITER. Pressure sensor valve. A safety switch that monitors the Pressure of the refrigerant. A/C ComPressor Relief Valve. A/C Service Valve Core. Air Conditioning (A/C) ComPressor Relief. Air Conditioning (A/C) Service Core. Air Conditioning Refrigerant Charging Port Schrader. Check. Fill. Hose and Amplifier; tube. HVAC Switch. Thrust sensor. Included with: AC line, AC tube, Center AC line, Condenser, Condenser to rear Hose AC Hose, Front AC line, Front Pressure line, Liquid line, Pressure Hose, Pressure line.

2.0 OR 3.0 LITER. A/C Refrigerant Discharge Hose. A/C Refrigerant Liquid Hose. AC tube. Air Conditioning (A/C) Refrigerant Liquid. Connector tube. CoolantPIP. Discharge. Inlet pipe. Pressure tube.

2.0 OR 3.0 LITER. Pressure hose o-ring. 9.5 x 2.5mm. A component which Prevents leaks at the Air Conditioning Refrigerant Pressure Sensor. A/C Line O-Ring. A/C Refrigerant Line O-Ring. Auxiliary A/C. Exc.Auxiliary A/C. Exc.Heat Pump. Part cannot be reused/reinstalled. R1234YF Refrigerant. Included with: AC Hose, AC Hose, from condenser to AC Tube, AC Line, AC Line Part cannot be reused/reinstalled, AC Tube, Center AC Tube, Condenser to evaporator Hose, Discharge Hose, Discharge Line, Discharge pipe, Evaporator to condenser AC Hose, Evaporator Tube, Front AC Line, Front pipe, Hose and Tube assembly, Liquid Line, Lower Hose, Pressure Hose, Pressure Line, Rear AC Line, Rear AC Line Part cannot be reused/reinstalled, Rear AC Tube, Refridgerant Hose Part cannot be reused/reinstalled, Refrigerant Hose, Refrigerant Hose Part cannot be reused/reinstalled, Suction Hose, Tube assembly, Upper Pressure Line, Valve AC Line Part cannot be reused/reinstalled.

2.0 OR 3.0 LITER. Pressure hose bolt. A Bolt used to attach the Drive Motor Battery Pack Charger to its mounting point. A Bolt which attaches the heater core or bracket to it's mounting point. A threaded rod with a Drive head (such as hex, 12 point, torx, etc) on one end used to secure the SuperCharger Intercooler to it's mounting point. A threaded rod with a Drive head (such as hex, 12 point, torx, etc.) on one end used to secure the Heater Control Valve Solenoid to it's mounting point. A threaded rod with a Drive head (such as hex, 12 point, torx, etc.) on one end used to secure the Yaw Sensor to a mounting point. A/C Refrigerant Line Bolt. A/C Refrigerant Line O-Ring. All Required. Bolt hat secures the Air Bag Impact Sensor. Bolt used to fasten the Engine Intake Manifold. Engine Coolant Pipe Bolt. From 09/30/2019. Part cannot be reused/reinstalled. Part is a one-time use part and cannot be re-used. Included with: AC Tube.

2.0 OR 3.0 LITER. Pressure hose nut. A component that helps hold the Headlamp Control Module to its mounting point. A Nut used to retain the Cargo Cover to it's mounting point. A Nut used to retain the Drive Motor Inverter Coolant Reservoir to it's mounting point. A Nut used to retain the Fender Filler Panel to it's mounting point. A Nut used to retain the Frame Rail End to it's mounting point. A Nut used to retain the Fuse and Relay Center to it's mounting point. A Nut used to retain the Trunk Lid Release Switch to it's mounting point. A Nut used to secure the Drive Motor battery pack charger to its mounting point. A Nut used to secure the liftgate finish Panel to it's mounting point. A Nut used to secure the sound absorber to its mounting point. A Nut which attaches the water pump to it's mounting surface. A Nut which is used to secure the Automatic Transmission shifter boot to its mounting point. A soLid metal or plastic block with a threaded hole in the Center which is used to secure the Hood Safety Catch to it's mounting point. A soLid metal or plastic block with a threaded hole in the Center which is used to secure the Instrument Panel Air Bag Inflator Module to its mounting point. A soLid metal or plastic block with a threaded hole in the Center which is used to secure the Seat Air Bag Inflator Module to its mounting point. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Active Suspension Control Module. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Active Suspension System Height Sensor. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Air Bag Crash Sensor. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Air Inlet Case. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Automatic Trans Control Module. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Automatic Transmission Gear Shift. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Backup Sensing System Module. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Blind Spot Detection System Warning Sensor. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Brake Cooling Duct. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Catalytic Converter Heat Shield. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Console Panel. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Convertible Top Control Module. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Coolant Pipe. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the CV Joint Splash Shield. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the DeckLid Latch. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Engine Coolant ExPansion Tank. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Engine Mount Heat Shield. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Engine Oil Level Sensor. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Exhaust Pipe Heat Shield. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Exhaust Pressure Regulator. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Floor Cover Panel. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Floor Pan Splash Shield. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Fuel Door Release Actuator. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Fuel Evaporative Emission Control System Line. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Fuel Tank Access Cover. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Radiator Support Panel Reinforcement. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Radiator Support Panel. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Seat Belt Guide. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Suspension Crossmember Reinforcement. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Suspension Strut Tower. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Trans Oil Cooler Line. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Trunk Floor Access Cover. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Turbocharger Heat Shield. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Yaw Sensor. A threaded rod with a Drive Head (such as hex, 12 point, torx, etc.) on one end used to secure the Hood Safety Catch to its mounting surface. A/C Refrigerant Line Nut. Air Bag Control Module Nut. Air Filter Housing Bolt. Anti-Theft Alarm Siren Nut. Audio Amplifier Nut. Back Glass Nut. Back Up Light Assembly Nut. Battery Hold Down Nut. Battery Tray Nut. Bumper Cover Reinforcement Beam Nut. Bumper Guide Nut. Bumper Impact Absorber Nut. Bumper Impact Bar Nut. Bumper Splash Shield Nut. Console Nut. Console Trim Panel Nut. Engine Control Module Nut. Engine Intake Manifold Nut. Exhaust Gas Recirculation (EGR) Tube Nut. Fender Nut. Fuel Tank Shield Nut. Fuse box mounting Nut. HeadLight Level Sensor Nut. Hood Latch Nut. Hood Latch Striker Plate Nut. Horn Nut. Instrument Panel Air Duct Nut. License Light Assembly Nut. Liftgate Pull Handle Nut. Liftgate Trim Cover Nut. Nut that secures the Seat Armrest Base to the mounting location. Part cannot be reused/reinstalled. Quarter Panel Splash Shield Nut. Radiator Mount Nut. Secondary Air Injection Pump Nut. Secures the hybrid Inverter Radiator to it's mounting point. Tail Light Nut. Window Regulator Nut. Included with: Bracket, Motor, Seat Assembly, Tail lamp Assembly, Turbocharger, Vacuum harness, Vacuum modulator, Window Regulator, Window Regulator Part cannot be reused/reinstalled.

2.0 OR 3.0 LITER. 3.0 liter.

2.0 OR 3.0 LITER. 4. 8x2. PartQualifier: 23. Upr hose & tube o-ring. 23.8 x 2.4mm. 7.6 x 2.5mm. A/C Line O-Ring. A/C Refrigerant Line O-Ring. Auxiliary A/C. Exc.Auxiliary A/C. Exc.Heat Pump. Heat Pump. Included with: AC Hose, AC Hose, from AC Tube to comPressor, AC Line, Center AC Hose, Center AC Line, Center AC Tube Part cannot be reused/reinstalled, ComPressor to evaporator Hose, Connector Tube, Pressure Hose, Pressure Hose Part cannot be reused/reinstalled, Return Line, Suction Hose, Suction Hose Part cannot be reused/reinstalled, Suction Line, Tube assembly, Upper Hose & Tube.

2.0 OR 3.0 LITER. 5. 7x2. PartQualifier: 13. Upr hose & tube o-ring. 13.7 x 2.5mm. A seal that Prevents oil from leaking out, or contaminants from enteRing the Air Conditioning Evaporator Core. A/C Expansion Valve O-Ring. A/C Line O-Ring. A/C Refrigerant Line O-Ring. Auxiliary A/C. Exc.Auxiliary A/C. Exc.Heat Pump. Heat Pump. Part cannot be reused/reinstalled. Part has related components that cannot be reused/reinstalled; seal and gasket. Part serviced with AC Line. Part serviced with housing. R1234YF Refrigerant. Included with: AC Hose, AC Hose, from condenser to comPressor, AC Line, AC Tube, AC Tube Part cannot be reused/reinstalled, Blower case, Center AC Line, Center AC Tube, Center AC Tube Part cannot be reused/reinstalled, Center plate, ComPressor to Evaporator Hose, Cooling pipe, Discharge Line, Front AC Line, Front pipe, Heat exchanger, Hose and Tube assembly, Housing, Liquid Line, Lower Hose, Lower Hose & Tube, Plate, Plate Part cannot be reused/reinstalled, Pressure Hose, Pressure Hose Part cannot be reused/reinstalled, Rear AC Hose, Rear AC Line, Rear AC Tube, Rear AC Tube Part cannot be reused/reinstalled, Rear pipe, Rear pipe assembly, Return Line, Suction Hose, Suction Hose Part cannot be reused/reinstalled, Suction Line, Suction pipe, Tube assembly, Upper Hose & Tube, Upper Pressure Tube, Valve AC Line Part cannot be reused/reinstalled,, Valve assembly.

2.0 OR 3.0 LITER. Upr hose & tube bolt. A Bolt used to attach the A/C Refrigerant Pressure Sensor to its mounting point. A threaded rod with a drive head (such as hex, 12 point, torx, etc.) on one end used to secure the HVAC Case to its mounting surface. A/C ComPressor Bolt. A/C Refrigerant Line Bolt. Included with: AC tube.

2.0 OR 3.0 LITER. 3.0 liter.

2.0 OR 3.0 LITER. Discharge hose o-ring. 11 x 2.5mm. A/C Line O-Ring. A/C Refrigerant Line O-Ring. Auxiliary A/C. Exc.Auxiliary A/C. Exc.Heat Pump. Heat Pump. Part cannot be reused/reinstalled. R1234YF Refrigerant. R134A Refrigerant. Included with: AC Hose, AC Hose Part cannot be reused/reinstalled, AC Hose, from AC Tube to comPressor, AC Line, AC Tube, Center AC Line, Center front AC Line, ComPressor to condenser Hose, Connector Tube, Discharge Hose, Discharge Hose Part cannot be reused/reinstalled, Discharge Line, Front AC Line, Front Pressure Hose, Front Pressure Hose Part cannot be reused/reinstalled, Liquid Line, Lower Hose & Tube, Pressure Hose, Pressure Line, Rear AC Tube, Rear Discharge Line, Rear pipe assembly, Refridgerant Hose Part cannot be reused/reinstalled, Refrigerant Hose Part cannot be reused/reinstalled, Suction Hose, Suction Line, Tube, Upper Hose, Upper Hose & Tube, Valve AC Line Part cannot be reused/reinstalled,.

2.0 OR 3.0 LITER. Discharge hose bolt. A Bolt used to attach the Drive Motor Battery Pack Charger to its mounting point. A Bolt which attaches the heater core or bracket to it's mounting point. A threaded rod with a Drive head (such as hex, 12 point, torx, etc) on one end used to secure the SuperCharger Intercooler to it's mounting point. A threaded rod with a Drive head (such as hex, 12 point, torx, etc.) on one end used to secure the Heater Control Valve Solenoid to it's mounting point. A threaded rod with a Drive head (such as hex, 12 point, torx, etc.) on one end used to secure the Yaw Sensor to a mounting point. A/C Refrigerant Line Bolt. A/C Refrigerant Line O-Ring. All Required. Bolt hat secures the Air Bag Impact Sensor. Bolt used to fasten the Engine Intake Manifold. Engine Coolant Pipe Bolt. From 09/30/2019. Part cannot be reused/reinstalled. Part is a one-time use part and cannot be re-used. Included with: AC Tube.

2.0 OR 3.0 LITER. Discharge hose mount bolt. A Bolt used to attach the A/C Refrigerant Pressure Sensor to its mounting point. A threaded rod with a drive head (such as hex, 12 point, torx, etc.) on one end used to secure the HVAC Case to its mounting surface. A/C ComPressor Bolt. A/C Refrigerant Line Bolt. Included with: AC tube.

2.0 OR 3.0 LITER. R1234yf. Sanden.

2.0 OR 3.0 LITER. R134a.

2.0 OR 3.0 LITER. 3.0 liter. Compressor assy mount bolt. A/C Compressor Bolt. Alternator Adjusting Bracket Bolt. Alternator Bracket Bolt. Part cannot be reused/reinstalled. Suspension Crossmember Bolt. Adjusting Bracket. mount. Air Conditioning (A/C). Cushion. Suspension Crossmember.

2.0 OR 3.0 LITER. Compressor assy sleeve. A/C Compressor Bolt Sleeve. Alternator Bracket Sleeve. Engine Crankshaft Pulley Spacer. AIR CONDITIONING (A/C) Compressor Bolt Sleeve. Alternator Bracket Sleeve. Compressor ASSEMBLY sleeve. Compressor BRACKET sleeve. Compressor sleeve. CRANKSHAFT pulley sleeve. Engine Crankshaft Pulley Spacer. Mount bracket sleeve. Oil filter hsng sleeve. Support bracket sleeve. Vibration damper sleeve. Included with: Alternator bracket, Compressor, Oil filter housing.

2.0 OR 3.0 LITER.

2.0 OR 3.0 LITER. Compressor assy valve. Sanden.

2.0 OR 3.0 LITER. Compressor assy valve. Denso.

2.0 OR 3.0 LITER. 3.0 liter. Mount bracket.

2.0 OR 3.0 LITER. 3.0 liter. Mount bracket bolt. A/C Compressor Bolt. Alternator Bracket Bolt. AIR CONDITIONING (A/C) Compressor. Alternator. OUTER HEX ROUND Screw.

2.0 OR 3.0 LITER. A/C Refrigerant Suction Hose. From 09/09/2019. Pipe used to transport A/C Refrigerant between other A/C components.

2.0 OR 3.0 LITER. Rear AC tube bracket.

2.0 OR 3.0 LITER. Rear AC tube grommet. A component that insulates the Intercooler Tube from its mounting point. A component that insulates, or isolates, the ABS hydraulic pump from vibration. This is mounted between the pump and it's mounting bracket. A rubber ring with a hole in the center which provides protection through which the ABS Control Module or a part of said component passes through. A/C Refrigerant Line Grommet. ABS Modulator Insulator. Control Module. Control unit. Modulator. Pump and Motor Assembly. AC Tube. Air Conditioning (A/C) Refrigerant Line. Charge Air Cooler Pipe. Intercooler Pipe. Mount bracket isolator. Included with: Mount bracket, Pressure Pipe.

2.0 OR 3.0 LITER. Rear AC tube nut. A component that helps hold the Headlamp Control Module to its mounting point. A Nut used to retain the Cargo Cover to it's mounting point. A Nut used to retain the Drive Motor Inverter Coolant Reservoir to it's mounting point. A Nut used to retain the Fender Filler Panel to it's mounting point. A Nut used to retain the Frame Rail End to it's mounting point. A Nut used to retain the Fuse and Relay Center to it's mounting point. A Nut used to retain the Trunk Lid Release Switch to it's mounting point. A Nut used to secure the Drive Motor battery pack charger to its mounting point. A Nut used to secure the liftgate finish Panel to it's mounting point. A Nut used to secure the sound absorber to its mounting point. A Nut which attaches the water pump to it's mounting surface. A Nut which is used to secure the Automatic Transmission shifter boot to its mounting point. A soLid metal or plastic block with a threaded hole in the Center which is used to secure the Hood Safety Catch to it's mounting point. A soLid metal or plastic block with a threaded hole in the Center which is used to secure the Instrument Panel Air Bag Inflator Module to its mounting point. A soLid metal or plastic block with a threaded hole in the Center which is used to secure the Seat Air Bag Inflator Module to its mounting point. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Active Suspension Control Module. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Active Suspension System Height Sensor. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Air Bag Crash Sensor. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Air Inlet Case. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Automatic Trans Control Module. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Automatic Transmission Gear Shift. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Backup Sensing System Module. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Blind Spot Detection System Warning Sensor. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Brake Cooling Duct. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Catalytic Converter Heat Shield. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Console Panel. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Convertible Top Control Module. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Coolant Pipe. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the CV Joint Splash Shield. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the DeckLid Latch. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Engine Coolant ExPansion Tank. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Engine Mount Heat Shield. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Engine Oil Level Sensor. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Exhaust Pipe Heat Shield. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Exhaust Pressure Regulator. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Floor Cover Panel. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Floor Pan Splash Shield. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Fuel Door Release Actuator. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Fuel Evaporative Emission Control System Line. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Fuel Tank Access Cover. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Radiator Support Panel Reinforcement. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Radiator Support Panel. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Seat Belt Guide. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Suspension Crossmember Reinforcement. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Suspension Strut Tower. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Trans Oil Cooler Line. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Trunk Floor Access Cover. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Turbocharger Heat Shield. A soLid metal or plastic block with a threaded hole in the Center which is used to tighten or adjust the Yaw Sensor. A threaded rod with a Drive Head (such as hex, 12 point, torx, etc.) on one end used to secure the Hood Safety Catch to its mounting surface. A/C Refrigerant Line Nut. Air Bag Control Module Nut. Air Filter Housing Bolt. Anti-Theft Alarm Siren Nut. Audio Amplifier Nut. Back Glass Nut. Back Up Light Assembly Nut. Battery Hold Down Nut. Battery Tray Nut. Bumper Cover Reinforcement Beam Nut. Bumper Guide Nut. Bumper Impact Absorber Nut. Bumper Impact Bar Nut. Bumper Splash Shield Nut. Console Nut. Console Trim Panel Nut. Engine Control Module Nut. Engine Intake Manifold Nut. Exhaust Gas Recirculation (EGR) Tube Nut. Fender Nut. Fuel Tank Shield Nut. Fuse box mounting Nut. HeadLight Level Sensor Nut. Hood Latch Nut. Hood Latch Striker Plate Nut. Horn Nut. Instrument Panel Air Duct Nut. License Light Assembly Nut. Liftgate Pull Handle Nut. Liftgate Trim Cover Nut. Nut that secures the Seat Armrest Base to the mounting location. Part cannot be reused/reinstalled. Quarter Panel Splash Shield Nut. Radiator Mount Nut. Secondary Air Injection Pump Nut. Secures the hybrid Inverter Radiator to it's mounting point. Tail Light Nut. Window Regulator Nut. Included with: Bracket, Motor, Seat Assembly, Tail lamp Assembly, Turbocharger, Vacuum harness, Vacuum modulator, Window Regulator, Window Regulator Part cannot be reused/reinstalled.

11/19/18-09/05/2022. 2.0 OR 3.0 LITER. R1234yf. A/C Refrigerant Suction Hose. Hose to carry Refrigerant. R1234YF Refrigerant. To 05/16/2022. AC line. Air Conditioning (A/C) Refrigerant. Connector. CoolantPIP. Inlet pipe. Intake PIPE.

2.0 OR 3.0 LITER. AC tube o-ring. 13.7 x 2.5mm. A seal that Prevents oil from leaking out, or contaminants from enteRing the Air Conditioning Evaporator Core. A/C Expansion Valve O-Ring. A/C Line O-Ring. A/C Refrigerant Line O-Ring. Auxiliary A/C. Exc.Auxiliary A/C. Exc.Heat Pump. Heat Pump. Part cannot be reused/reinstalled. Part has related components that cannot be reused/reinstalled; seal and gasket. Part serviced with AC Line. Part serviced with housing. R1234YF Refrigerant. Included with: AC Hose, AC Hose, from condenser to comPressor, AC Line, AC Tube, AC Tube Part cannot be reused/reinstalled, Blower case, Center AC Line, Center AC Tube, Center AC Tube Part cannot be reused/reinstalled, Center plate, ComPressor to Evaporator Hose, Cooling pipe, Discharge Line, Front AC Line, Front pipe, Heat exchanger, Hose and Tube assembly, Housing, Liquid Line, Lower Hose, Lower Hose & Tube, Plate, Plate Part cannot be reused/reinstalled, Pressure Hose, Pressure Hose Part cannot be reused/reinstalled, Rear AC Hose, Rear AC Line, Rear AC Tube, Rear AC Tube Part cannot be reused/reinstalled, Rear pipe, Rear pipe assembly, Return Line, Suction Hose, Suction Hose Part cannot be reused/reinstalled, Suction Line, Suction pipe, Tube assembly, Upper Hose & Tube, Upper Pressure Tube, Valve AC Line Part cannot be reused/reinstalled,, Valve assembly.

2.0 OR 3.0 LITER. AC tube valve. R1234yf.

2.0 OR 3.0 LITER. AC tube cap. R1234yf.

2.0 OR 3.0 LITER. R1234yf. A/C Refrigerant Discharge Hose. A/C Refrigerant Liquid Hose. From 10/01/2018. Pipe used to transport A/C Refrigerant between other A/C components. R1234YF Refrigerant.

2.0 OR 3.0 LITER. AC line o-ring. 7.6 x 2.5mm. A seal that Prevents oil from leaking out, or contaminants from enteRing the Air Conditioning Evaporator Core. A/C Expansion Valve O-Ring. A/C Line O-Ring. A/C Refrigerant Line O-Ring. Exc.Heat Pump. Part has related components that cannot be reused/reinstalled; seal and gasket. Part serviced with AC Line. Part serviced with housing. Included with: AC Hose, AC Line, AC Line Part cannot be reused/reinstalled, AC Tube, Blower case, Center AC Line Part cannot be reused/reinstalled, Cooling pipe, Discharge pipe Part cannot be reused/reinstalled, Front AC Line, Heat exchanger, Hose and Tube assembly, Housing, Liquid Line, Pressure Hose, Pressure Line, Rear AC Hose, Rear AC Line, Rear AC Line Part cannot be reused/reinstalled, Rear AC Tube Part cannot be reused/reinstalled, Rear pipe, Rear pipe assembly, Refrigerant Hose, Suction Line, Suction pipe, Tube assembly, Upper Pressure Line, Valve AC Line Part cannot be reused/reinstalled.

2.0 OR 3.0 LITER. AC line valve. R1234yf.

2.0 OR 3.0 LITER. AC line cap. R1234yf.

2.0 OR 3.0 LITER. from 11/29/2021. Pressure sensor. to 11/29/2021. A safety switch that monitors the pressure of the refrigerant. A/C Refrigerant Pressure Sensor. From 03/07/2022. From 11/29/2021. Included with: AC line, AC tube, Condenser to rear hose AC hose, Front AC line Order by application, Front pressure line, Liquid line, Pressure hose, Pressure line.